Scarecrow Sterling Silver Vampire Fangs

Home > Scarecrow Dental Fit Fangs >

Scarecrow 100% Sterling Silver Fangs

100% Sterling Silver custom fit vampire fangs. Everything you need to make a tight, ridged mold if included!

These fangs list at nearly $50! This is a great chance to get these 100% Sterling Silver Fangs at a great price! Vampfangs offers the best prices on the latest Scarecrow products anywhere!

List Price: $69.95
Our Price: $42.95
You save $27.00!

Quantity in Stock:30
Availability:: Usually ships in 24 hours
Product Code: SSF100

Qty:

Description

The same great molding system and look of Scarecrow Natural Fangs! These are beautiful!

The kit comes with the Scarecrow SNAP FIT molding system that blows away the molding systems other brands offer. NO boiling water, NO Sticky adhesive, NO partial plates that make you talk like a lispy vampire!

Vampfangs has been the leader in quality dental prosthetics and custom fangs for over 10 Years!

Everything you need to make a rigid, custom mold of your teeth inside the caps is included in our Skull Box. NEW "Dental Snap-Fit" Interliner Customizing Material, a handy mixing vessel/carry case and a stir stick. All you need is a mirror & paper towel or tissue.

Features

HOW THEY WORK

A) MIX:
Pour powder from one capsule into the deep side of the carry case, by gently twisting the capsule ends apart. Remove bottle lid, snap off tip and dispense 7 drops ( for "Shredders" use 14 drops )onto the powder. Pick up the case in your hand and tilt slightly. Stir with the stick provided for 10-15 seconds until the mixture is uniform and just pasty while keeping the material in a glob at the lower edge of the tilted case as not to waste any.

B) FIT:
Scoop the glob of material into one fang, applying it onto the front and back as evenly as possible rather than just filling up he cavity in the fang. Gently push the fang all the way up onto your tooth, attempting to locate the best position in one motion as discussed. Try not to wiggle, adjust or reposition the fang after you push it all the way up. Leave it on for 5 minutes so it can harden, but do not remove it yet, and don't work on the next fang until 5 minutes has passed so that you don't accidentally loosen it before it sets up. With the first fang in place, position the next fang in a mirror. Orient this fang relative to the first so that it has a similar angle and looks natural. After you practiced putting it on accurately, follow steps A and B again.

C) REMOVE:
The Interliner continues to harden even after you've finished fitting your fangs. To prevent them from getting stuck on your teeth, remove your fangs to "break the seal" right after you complete the customizing process on both fangs, then you can then put them back on. Gently push you lower teeth forward against the backside of the fang tips until you hear a slight click (see illus.C). Then wiggle and pull gently with your fingers until they loosen up. It may take a minute the first time you remove them. Your fangs will now clip on and off easily, yet fit snug.

TIP: If fangs are well positioned but you want them to fit tighter, customize again over the existing liner with a single capsule, but remember to remove them after they're done. Use only one capsule to customize over the existing interliner for both fangs.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Scarecrow Dental Fit Fangs
Scarecrow Dental Fit Fangs > Precious Metal Fangs

	Scarecrow Pro Spiral Fangs $19.95
	Scarecrow Classic Red Metallic Fangs $17.95
	Scarecrow Natural Orange Metallic Fangs $17.95
	Scarecrow Classic Blood Tipped Vampire Fangs $15.95
	Scarecrow Molding Kit $6.95
	Scarecrow Mechanoid Flexible Veneers $24.95
	Scarecrow Lost Boys Flexible Veneers $24.95
	Scarecrow Classic Gun Metal Metallic Fangs $17.95
	Scarecrow Subtle Glow Fangs $13.95

COMPANY

SHOPPING SERVICES

MY ACCOUNT

CUSTOMER SERVICE

COMPANY

SHOPPING SERVICES

MY ACCOUNT

CUSTOMER SERVICE

SIGN UP FOR OUR NEWSLETTER: